Glendyne Canadian Natural Slate 504mm x 254mm x 5-6mm

Name: Glendyne Canadian Natural Slate 504mm x 254mm x 5-6mm
Brand: Isle Of Wight DIY Supplies
Price: 4.12 GBP
Availability: InStock

Size: Glendyne Canadian Natural Slate 504mm x 254mm x 5-6mm

Glendyne Canadian Natural Slate 508mm x 381mm x 5-6mm Slate & Half

£4.12

Quantity

Buy Now!

The Glendyne slate is dark grey with shades of blue, giving a touch of elegance and nobility to buildings, enhancing their aesthetic and market value. Its shades are very homogeneous despite the presence of a discrete stratification marked by silts which are usually very fine. In addition, Glendyne slate is free of pyrite or any other metal intrusion.

WHY GLENDYNE?

Our Commitment to Quality:

Our manufacturing processes combines tradition and the expertise of high technology master slate workers, in order to offer exquisite slate. Our plant is fully equipped with analysis and automation systems to make the most of each slate block and manufacture a product of the greatest possible quality.

Our modern and adapted facilities also ensure our workers’ well-being and safety. People are at the heart of our manufacturing principles in order to maximize resources.

State of the art manufacturing to allow for a more efficient procedure and better finished product.

Batch number traceability

Contains No Pyrite Or Metal Inclusions

Due to the slate deposits that Glendyne slates are quarried they contain no Pyrite or Metal inclusions so will not rust or bleed!

Consistency

The Glendyne manufacturing and sorting process guarantees slate with an exceptional level of uniformity meaning that labour and installation times are greatly reduced.

75 Year Product Guarantee

Glendyne natural slates come with a 75 year product guarantee.

Specs
Installation

Thickness 5-6mm

Width: 254mm

Length: 508mm

Colour: Dark Grey with a hint of Blue

Minimum Pitch: 27.5° - Isle Of Wight Counts as a severe exposure area

Slates Per Mtr2: 20

Headlap: 110mm(if at below 30°) 100mm (If above 30°)

Batten Gauge: 195mm @ 110mm Headlap - 250mm @ 100mm Headlap

Country Of Origin: Canada

Glendyne slate is normally laid with copper or Aluminum nails (30/32mm x 3.00/3.35mm) but can also be laid with slate hooks.

Please note that slate hooks cannot be used on roofs below 30°. Roofs lower than this but not exceeding minimum pitch for the slate must be nailed.
Glendyne slate can be cut with an angle grinder by ideally should be cut with either a hand held/electric slate cutter or guillotine to preserve the dressed edge on the slate cuts.